Elliott Group announced that it has won an order to supply cryogenic rotating equipment for the Port Arthur LNG Phase 1 project in Jefferson County, Texas. Elliott will supply cryogenic pumps, expanders, boil-off gas (BOG) compressors, and end flash gas (EFG) compressors for the project, which is being developed by Sempra Infrastructure.
Elliott Group is pleased to announce the opening of Elliott Gas Services Saudi Arabia (EGSSA), which is the product of a joint venture between Elliott and GAS Arabian Services. EGSSA, which was formed in 2011, identified the need for an in-country facility to service and repair turbomachinery.
Elliott Group, which is part of the Energy Company of Ebara Corporation, will be at India Energy Week (IEW) in Bangalore on February 6 - 8 as a key sponsor, exhibitor, and participant.
Elliott has combined their proven expertise and extensive experience in CO2 compression and pump technology to develop a solution that addresses the handling of high pressure CO2. This compressor/pump design is equipped to handle any project and/or equipment related to CO2 compression needs from atmospheric pressure to typical piping pressure of around 2200 PSI and higher for sequestration requirements.
Elliott Group today announced the rollout of their Gemini Compressor Performance Monitoring System. Developed jointly by Elliott Group and Tri-Sen Systems, Gemini is a focused software solution designed specifically for continuous monitoring, evaluation, and analysis of critical compressor performance and associated auxiliary support systems.
Elliott Group announced today that Ronald Josefczyk has been appointed Vice President of Global Manufacturing, effective July 1, 2022. He succeeds Takanobu Miyaki who was named Chief Executive Officer (CEO) in March 2022.
Elliott Group announces the appointment of Matthew Rhodes as Vice President of Global Service, effective July 1, 2022. Matthew succeeds Shane Reph who was named Chief Operations Officer (COO) in April 2022.
Elliott Group has introduced a compressor designed for current and future low carbon natural gas pipeline transmission networks including hydrogen blends. The 140TCH Pipeline Compressor is available as an electric-driven solution, targeting new and replacement pipeline stations with strict NOx and CO2 emissions requirements. The advanced 140TCH design represents Elliott’s commitment to sustainability in response to evolving environmental concerns and increasingly complex restrictive emissions regulations.
Elliott Group announced today that Takanobu Miyaki has been appointed Chief Executive Officer (CEO), succeeding outgoing CEO, Michael Lordi, who has retired after 35 years with Elliott Group. Elliott also announced the appointment of Shane Reph as Chief Operating Officer (COO).
Company officials and invited guests will gather on October 22, 2021 to commemorate the completion of Elliott’s new $60M state-of-the-art cryogenic pumps testing facility. The 10:30 AM ribbon cutting ceremony will take place at the new facility, 718 Bullitt Avenue in Jeannette.
Elliott Group has released a new turbine wireless sensor specifically designed for Elliott single-stage (YR) steam turbines. The sensor allows plants to modernize their turbine monitoring capabilities at a fraction of the cost of conventional instrumentation.
Jeannette, PA – June 22, 2021 – Elliott Group and Asia Motor Service Center (AMC) have signed an alliance agreement to provide rotor inspection services in Thailand. AMC is a leading repair and maintenance company in Pathum Thani Province, north of Bangkok.
Energy is a key component of global sustainability, and turbomachinery plays an important role in energy production. Elliott contributes to global sustainability through design innovation, investment in new technologies, and working closely with customers to drive processing efficiencies.
Watch Video
Jeannette, PA – August 28, 2020 – Elliott Group has released a new Compressor Online Performance Prediction Tool (OPPT) specially designed for Elliott compressors. The web-based software tool calculates compressor performance to predict trends and assess future performance.
Jeannette, PA – July 21, 2020 – Elliott has developed the first centrifugal compressor coating specifically formulated for hydrogen recycle compressors. Elliott’s Pos-E-Coat® Protect coating protects critical components from the unique fouling and corrosion challenges associated with the harsh operating environments of hydrogen recycle service.
Jeannette, PA, July 16, 2020 – Elliott Group today announced plans to close its Packaging Solutions operations in Belle Vernon, Pennsylvania by the end of 2020, and to consolidate design engineering and manufacturing operations for unit packaging and auxiliary systems with its primary Engineered Products business in Jeannette.
Jeannette, PA, April 28, 2020 – Elliott Group has named Shane Reph Vice President of Global Service, effective May 4, 2020. Shane replaces Ronald Frye, who has retired after more than 40 years with Elliott. Shane will report directly to CEO Michael Lordi.
Jeannette, PA, March 31, 2020 – Elliott Group announced today that Takanobu (Nobu) Miyaki assumed the role of Vice President of Industrial Products (IP) effective March 1, 2020, reporting directly to CEO Michael Lordi.
The public health risks associated with COVID-19 are evolving quickly and affecting all of us. Because Elliott has operations worldwide – many in highly affected countries and regions – we are closely focused on protecting the health and safety of our employees and their families, our customers and suppliers, and our neighbors in the communities and countries in which we operate.
Jeannette, PA, December 3, 2019 – Elliott Group broke ground today on a $60M Cryodynamic Products test facility about a mile from the company’s headquarters and main manufacturing campus in Jeannette, Pennsylvania. The biggest capital project in Elliott’s history will include six buildings, with approximately 30,000 square feet under roof on the 13-acre site. Construction will take 18 months. When the new facility is fully operational, it will generate approximately 130 jobs.
Jeannette, PA – November 18, 2019 – Elliott Group will be the sponsor and host of the 2020 Thermal, Mechanical, and Chemical Energy Storage (TMCES) workshop which will be held on February 4, 2020, in Pittsburgh, PA. The “by invitation only” workshop, which will be chaired by Dr. Klaus Brun, Elliott’s Director of R&D, will bring together approximately 120 engineers and scientists from industry, academia, and government working in the field of TMCES technology and products.
Jeannette, PA – October 24, 2019 – Elliott Company (Elliott) announced today that it has taken title and possession of the former Jeannette Glass property under terms of a Purchase and Sale Agreement dated March 13, 2018 between Elliott and the Westmoreland County Industrial Development Corporation (WCIDC). The WCIDC acts as the primary marketing agent for Westmoreland County to support economic development efforts within the county.
Jeannette, PA, April 1, 2019 – Elliott Group announced today that the merger of Ebara International Corporation, based in Sparks, Nevada, with its operations in Jeannette, PA, is now complete. On April 1, 2019, the merged entity became one of four business units within Elliott Group.
Jeannette, PA, February 28, 2019 – Elliott Group is pleased to announce the grand opening of its new manufacturing facility in Bengaluru, India. The new factory shares the same campus as the company’s existing service center in the Bidadi Industrial Area southwest of Bengaluru. Fully staffed and equipped to design, manufacture and test Elliott YR steam turbines, the facility also houses engineering, sales and service offices, as well as a state-of-the-art training center.
Jeannette, PA – January 11, 2019 – Elliott Group announced today that Michael Lordi has been appointed Chief Executive Officer (CEO), succeeding outgoing CEO, Yasuyuki Uruma, who has retired after 47 years with Elliott Group and Elliott’s parent company, Ebara Corporation.
Jeannette, PA – November 14, 2018 – Elliott Group is pleased to announce that Dr. Klaus Brun has joined the company as Director of Research and Development (R&D). Dr. Brun will lead Elliott’s advanced development teams for all rotating equipment product lines and related systems, including materials engineering, reporting directly to Elliott Group’s Deputy CEO, Toshihiko Miyashita.
Jeannette, PA – October 2, 2018 – Elliott Group announced today that it is moving forward with plans to relocate manufacturing and testing of cryogenic pumps and expanders to Jeannette. The pumps and expanders, which are used in gas liquefaction applications, are a new addition to Elliott’s product lines following the acquisition last October of Ebara International Corporation’s Cryodynamics Division located in Sparks, Nevada.
Jeannette, PA – July 2, 2018 – Elliott Group today announced the appointment of Mark Babyak as Vice President of its Cryodynamic Products business, formerly the Cryodynamics Division of Ebara International Corporation. Mark replaces John Rann who is retiring after 41 years of service with Elliott.
Jeannette, PA – May 22, 2018 – Elliott Group announces that Nicholas Dorsch has joined its senior management team as Vice President of Industrial Products, effective immediately. Dorsch will lead the company’s industrial steam turbine line and its power generation group, reporting directly to Chief Operating Officer, Michael Lordi.
Jeannette, PA – December 12, 2017 – Elliott Group has signed a long-term service agreement (LTSA) to provide service and support for Borealis Group’s fleet of rotating equipment in Europe. The five-year contract includes general service, equipment upgrades, rotor repairs, technical support, emergency response, and turnarounds for all of Borealis’ European production facilities.
Jeannette, PA – October 12, 2017 – Elliott Group today announced the appointment of John Rann as Vice President of its newly integrated cryogenic pumps business, Ebara International Corporation’s Cryodynamics Operation (EIC Cryo). EIC Cryo will operate as one of four business units within Elliott Group. Elliott also announced the promotion of Shugo Hosoda to Vice President of Engineered Products, succeeding John Rann.
Jeannette, PA, October 12, 2017 – Elliott Company announced today that it has integrated the operation of Ebara International Corporation’s Cryodynamics Division (EIC Cryo) based in Sparks, Nevada with its operations in Jeannette, PA. The strategic, inter-divisional realignment combines operations under Elliott Group, a wholly owned subsidiary of Ebara Corporation.
Elliott Group, a global provider of rotating equipment for the oil & gas, power generation, and process industries, announced today that its Pneumatic Trip System, with or without partial stroke actuation, has received the IEC 61508 SIL 3 Capable safety certification. The SIL 3 Capable certification was awarded by Exida, a leading certification company specializing in automation system safety, security, and availability.
Elliott Group has been awarded a contract to supply compression equipment for Hengli Petrochemical Refinery’s integrated refining and petrochemical complex now under construction in Dalian, China. The new refinery, the largest such project approved to date in China, is part of the Chinese government’s 13th five-year plan of social and economic development initiatives.
Jeannette, PA – Elliott Group has announced that Mark Cain has joined the company as Vice President of Human Resources, effective May 1, 2017. Cain, who brings three decades of executive human resources (HR) management experience to Elliott, will report directly to Chief Operating Officer, Michael Lordi.
February 15, 2017 - Jeannette, Pennsylvania – Michael Lordi, Chief Operations Manager of Elliott Group, will be the featured speaker at the annual membership luncheon sponsored by the Economic Growth Connection of Westmoreland County, Pennsylvania. The luncheon will include an annual update from the Westmoreland Development Council.
Jeannette, PA – April 1, 2016 – Elliott Group announced today that Michael Lordi has been appointed Chief Operating Officer, succeeding Art Titus, who is retiring after nine years with Elliott.
March 31, 2016 - Jeannette, Pennsylvania, USA / Munich, Germany –– Elliott Group and The Linde Group’s Engineering Division have entered into an agreement to cooperate in the small-to mid-scale LNG business. The parties have developed a highly standardized and modularized concept for the main refrigerant cycle compression section of Linde’s StarLNGTM plants ranging from 0.2 MMTPA to 1.3 MMTPA. The agreement enables Linde Engineering to significantly increase the speed to the market.
Elliott Group’s Global Service business has completed a major turnaround at Petro Rabigh’s refinery and petrochemical complex (Rabigh Refining & Petrochemical Company) in Makkah Province, Kingdom of Saudi Arabia. The planned maintenance shutdown encompassed the overhaul and/or rerate of 17 machines - eleven compressors and six steam turbines - to expand production capacity.
Jeannette, PA – March 29, 2016 – Elliott Group has introduced a new pneumatic trip system with partial stroke actuation. The partial stroke pneumatic trip system provides turbine operators with a safe and effective way to regularly test the trip valve without interfering with the turbine’s operation or its ability to trip.
Petrobras has renewed a contract with Elliott Group in Brazil for rotor inspection and storage. The contract covers a minimum of 80 spare turbine and compressor rotors for Petrobras refineries in Brazil.